AW-05-01 Spread Spectrum Microwave System

AW-05-01 Spread Spectrum Microwave System

Product Introduction:

AW-05-01 Spread Spectrum Microwave System is provided by Guilin Aiwei Electronic Equipment CO.,LTD,a major Organic Chemical Materials supplier in Chemicals Material wholesale industry in China.You can check out the specification of AW-05-01 Spread Spectrum Microwave System below or get any optional result clicking into the following keywords and you can check the authentications and testimonials of AW-05-01 Spread Spectrum Microwave System .

Description:

The AW-05-01 Type of spread spectrum microwave system provides an off-the-shelf, ready-to-install solution to a number of long-range point-to-point communication applications. The products were designed from the ground up with emphasis on performance, reliability, and flexibility and have been qualified under the most stringent temperature, shock, and vibration conditions.

AW-05-01 microwave system provide unlicensed wireless interconnect solutions in a variety of telecommunications interfaces and operate in the 2.4 and 5.8 GHz ISM bands.

��AW-05-01 A One E1connection
��AW-05-01 B Four E1connections
��AW-05-01 C Four E1connections, one 100Base-T connection

Network configurations
AW-05-01 microwave system provides full-duplex data including E1 connections, Ethernet connections and RS232 connections. The capacity of AW-05-01 microwave system is from 2Mbps to 8Mbps. This radio solution ensures reliable connections for voice and data links over medium and long distances.

AW-05-01 microwave system is separated into two sections: an indoor unit (modem), operating at a lower intermediate frequency or at base band and an outdoor unit (RF) located at the antenna. Between the outdoor unit and the indoor unit, signals are transmitted through two IF wires at a lower frequency, so losses are substantially reduced. This allows the use of less expensive cables with no loss of transmitter output power and receiving sensitivity.

Typical Applications
�� Cellular/PCS base station interconnect
��Private networks
��Railroads and transportation
��Banks, hospitals, universities, corporations
��Disaster recovery and special events
��PSTN/ PABX /LAN extensions
��Rural telephones
��Video conferencing

Specifications
Transmitter
2.4GHz
5.8GHz

RF Channles
2
3

Bandwith
20MHz
20MHz

Interval
43MHz
65MHz

Output Power
20dBm

Modulation
QPSK DSSS

Coding
Convolutional encoding,Viterbi decoding



Reciever
2.4G/1E1
2.4G/4E1
5.8G/1E1
5.8G/4E1

Maximum
��30dBm

No Deformation
0dBm

Sensitivity��10��6BER��
��89dBm
��87dBm
��88dBm
��86dBm



DataConnections
E1
ITU-T G.703��HDB3

75��Non-Balance��BNC

n��E1��n��0��1��2��3��4��

Ethernet
100Base-T

RJ45

n��2048kbps��n��0��1��2��3��4��




Indoor unit
Outdoor unit

Operating Temperature
��15°C �� ��55°C
��40°C �� ��60°C

Store Temperature
��30°C �� ��60°C
��50°C �� ��65°C

Relative Humidity
0 �� 95%( non-condensing)
0 �� 95%( non-condensing)

Physical size
44��20��4.4��cm��(19�� 1U)
40��25��6��cm��

Weight
1.7kg
3.5kg



Max If Wire Length
200m
LED Indicator
Power, Rx, Tx, Alarm

Voltage
��36V����72V DC
LCD
Primary Parameters, Link Status

Power Consumption
40W
Control Connection
RS232��DB9





Print Page
E-mail