Product Introduction:
10W VHF/UHF SCADA Data Transceiver is provided by Shenzhen Friendcom Telecom Co., Ltd.,a major Telecommunication Products supplier in Telecommunication Products wholesale industry in China.You can check out the specification of 10W VHF/UHF SCADA Data Transceiver below or get any optional result clicking into the following keywords 10W VHF/UHF SCADA Data Transceiver and you can check the authentications and testimonials of 10W VHF/UHF SCADA Data Transceiver .
Description:
Specifications:
1) Carrier frequency: VHF/UHF
2) MSK
3) Channel spacing: 25KHz
4) Channel: 64
5) CTCSS: 38
6) Air data rate: 1,200bps/2,400bps
7) Audio modulation range: 300 ~ 3400Hz
8) Speaker: 2W / 8Ω
9) Antenna impedance: 50Ω
10) Voltage: DC 9 ~ 15V, 13.8V typical
11) Temperature: -40°C ~ +70°C
Receiver:
1) Sensitivity: ≤0.25μV (12 dB SINAD )
2) IF1: 45MHz
3) IF2: 455kHz
4) Intermodulation rejection: ≥75dB
5) Adjacent channel selectivity: ≥70dB
6) Audio distortion: ≤3％
7) FSK output amplitude: 0 ~ 450mV
8) AF output amplitude: 0 ~ 5V
Transmitter:
1) Frequency stability: ±2.5ppm
2) Frequency deviation: ≤±5kHz
3) Adjacent channel rejection: ≥70dB
4) Startup time of transmitter: ≤50ms
5) Audio distortion: ≤3％
6) RF power: ≤10W
7) Interface: RS-232/RS-485, data rate: 1200 ~ 9600bps optional,
format: 8N1/8E1/8o1 optional
8) Voltage: DC 9 ~ 15V (typical 13.8V)
9) Standby current of receiver: ≤50mA (power-saving status)
10) Transmitting current: ≤2A (13.8V 10W)
11) Size: 160 x 115 x 45mm
12) Weight: 900g
