1000M Fiber LAN card

1000M Fiber LAN card

Product Introduction:

1000M Fiber LAN card is provided by Shenzhen FH-Net Optoelectronics Co,a major Fiber Optic Equipment supplier in Broadcast & Telecom wholesale industry in China.You can check out the specification of 1000M Fiber LAN card below or get any optional result clicking into the following keywords 1000M Fiber LAN card , China fiber optic supplier , LAN card Fiber LAN card manufacturer , Find Telecommunications made in china products , Fiber Optic Equipment china supplier.Shenzhen FH-Net Optoelectronics Co and you can check the authentications and testimonials of 1000M Fiber LAN card .

Description:

FHC-7000 series Optical Gigabit Ethernet adapter is designed to operate at 1000Mbps at full duplex. FHC-7000 series supports IEEE 802.1p Traffic Prioritization for time-sensitive and mission-critical traffic. With IEEE 802.1Q multiple VLAN support, it provides VLAN tables that can filter packets by recognized VLAN tags. The FHC-7000 series provides IEEE802.3x Flow Control Enhancements, which are needed for a network adapter to function with a switch. In full-duplex mode, MAC implements the PAUSE control function. This means when a switch is connected in full-duplex mode and it senses that its buffer will overflow in the near future, the switch will transmit one standard Ethernet packet that causes the FHC7000 series to pause for a period, thus avoiding internal buffer overflow and packet loss.
Product Features
Hardware VLAN filtering.
Chip-Level Internet Protocol (CLIP) for IP packet processing.
IEEE 802.3z compliant.
Comply with the PCI v2.2 interface standard supporting operation at 33/66 MHz and 32/64 bit wide data path.
Full duplex or half-duplex operation.
On-board verification of IP header and TCP/UDP checksum.
On-board screening of VLAN-tagged packets tagged in compliance IEEE 802.3ac.
IEEE 802.3z 1000Base-SX,1000Base-LX Gigabit Ethernet compliant.
Standard optical fiber connector and cable type options.
Transceiver lasers compliant with Laser AEL Class 1 standards and is safe for eye-viewing.
Plug and Play installation.
Two LED indicators: Link/RxAct, Power/TxAct.
Drivers for all leading Network Operating Systems,Support for:
Windows XP
Windows 2000
Windows 95 OSR2, 98, 98 SE
Windows NT 4.0
Windows ME
Novell Netware Server 4.x, 5.x , 6
Novell Netware Client32 for DOS
Linux (kernel 2.4.x)
Specifications
Network Type: Optical Ethernet 1000Base-SX/1000Base-LX
Single fiber / dual wavelength 1310 / 1550nm, maximum reaching 20km
Dual fiber / single wavelength 1310nm or 1550nm, maximum reaching 80km
Dual fiber / single wavelength 850nm, accepts 62.5 / 125 micron multi-mode fiber optic cable for a maximum length of 260 meters, accepts 50 / 125 micron multi-mode fiber optic cable for a maximum length of 550 meters.
Host interface: PCI 2.1 Bus (Bus Master)
Physical Dimensions: 165 mm x 66 cm
Power Consumption: 5 Watts max
Environment:
Storage: -25℃~ 55℃
Operating: -5℃~ 50℃
Humidity: 5% to 95% non-condensing


<form action="http://allenker.en.busytrade.com/

More products from this supplier

Print Page
E-mail