wire tube condenser

Product Introduction:

wire tube condenser is provided by JINAN BESTAR INC,a major Commercial Furniture supplier in Furniture & Furnishing wholesale industry in China.You can check out the specification of wire tube condenser below or get any optional result clicking into the following keywords and you can check the authentications and testimonials of wire tube condenser .

Description:

specifications: 1.raw material: a.rolling welded steel tube: 4.76χ0.71, 6.0χ0.71, 6.35χ0.71 b.low carbon steel wire: 1.4 or 1.6mm c.bracket: steel plate spcc thickness 0.6 to 2.0 d.base mounting plate: spcc thickness 0.6 to 2.02.technical standards: can produce according to clients drawing or samples3.performance: a. surface with electrophoresis coating to prevent the corrosion b. inner cleanness can meet the requirement of r134a and cfc cooling system c. can satisfy the cooling capability requirementsstructure:1. flat type of wire on tube condenser used at the back2. bended or spiral type of wire on tube condenser used at the bottom3. wrapped type of tube embed on plate4. flat type of louvre condenser used at the backr134a cooling system tube inside standard1.residual moisture: ≤20mg per m22. residual dusty: ≤30mg per m23. residual mineral oil: ≤7mg per m24. residual chlorine: ≤3mg per m25. sealing density: ≥1.65mpa specification of e coating:1. coating thickness: a.thickness of anodic electrophoresis coating:≥12μm b. thickness of cathodic electrophoresis coating:≥20μm2. hardness of coating: ≥2h3. impact of coating: 50cm.kg per cm impact, no crack4. adhesion of coating: ≥2 grade5. flexibility of coating: around r≡3d bend 180 degrees, no crack or no fall
off
6. corrosion resistant (salt spray gb2423) a. anodic electrophoresis coating: ≥24hrs b. cathodic electrophoresis coating: ≥96hrs packing:standard seaworthy carton, wooden pallet or wooden case