Product Introduction:
CopsVoip WiMax CPE WM900 is provided by CopsVoip Electech Guigang Co.,Ltd,a major Network Communications supplier in Telecommunication Products wholesale industry in China.You can check out the specification of CopsVoip WiMax CPE WM900 below or get any optional result clicking into the following keywords WiMax CPE , WiMax Equipent , IEEE 80216D2004 and you can check the authentications and testimonials of CopsVoip WiMax CPE WM900.
Description:
WiMax CPE Technical Specifications
Model: WM900
1.0 Wireless Radio and Modem
System Capability:
LOS, Optical LOS, non LOS
Cell-based point-to-multipoint deployment
Wireless MAC Protocol:
IEEE802.16d-2004
(Future support IEEE802.16e-2005)
Supportable Frequency:
3.400-3.600 GHz
Duplex Technique:
TDD (time division duplex)
HD-FDD (half duplex frequency division duplex)
Spectral Efficiency:
Up to 5 bps/Hz (over the air),
Up to 3 bps/Hz (net)
Modulation:
OFDM 256 FFT with adaptive modulation: BPSK, QPSK, 16QAM, 64QAM
Coding Rates:
1/2, 2/3, 3/4
Channel bandwidth:
3.5MHz, 7 MHz
Maximum Over the Air Rate:
Up to 17.5 Mbps @ 3.5 MHz channel
Up to 35 Mbps @ 7 MHz channel
Maximum Output Power:
+20dBm for QPSK, 16dBm for 64 QAM
Receive Sensitivity:
-75/-72dBm for highest modulation (64QAM3/4) @3.5/7MHz
-93/-90dBm for lowest modulation (BPSK1/2) @3.5/7MHz
Integrated Flat Antenna:
16dBi
2.0 Data Communications
Data:
IEEE 802.3 CSMA/CD
Network Connections:
10/100 Ethernet (RJ-45)
Network Attributes:
Transparent bridge, 802.1Q VLAN, 802.1p
DHCP client, DHCP pass-through
System Configuration: Telnet CLI, FTP (software updates)
Maximum Over Ethernet Data Rate:
Up to 10.8 Mbps @ 3.5 MHz channel
Up to 23 Mbps @ 7 MHz channel
3.0 Mechanical and Power Specification
Dimensions (mm):
ODU: 230(L) x 230(W) x 55(D)
IDU: 125(L) x 75(W) x 38(D)
Weight: 3.5kg
Power Requirements:
Auto-sensing 110/220/240 VAC 50/60 Hz
Power consumption:
<20 Watts
4.0 Environmental
Operating Temperature:
CPE IDU: -10C to 60C
CPE ODU: -35C to 60C
Operating Humidity:
IDU: 5%-95% non condensing
ODU: 5%-95% non condensing, weather protected
Note: Actual Ethernet data throughput is dependent on channel size, protocols, packet size, burst rate, transmission latency, and link distance.