Product Introduction:
Three Phase Closed I-P Link Energy Meter Test Bench is provided by Bofa Instrument & Equipment Co., Ltd,a major Fashion supplier in Fashion wholesale industry in China.You can check out the specification of Three Phase Closed I-P Link Energy Meter Test Bench below or get any optional result clicking into the following keywords and you can check the authentications and testimonials of Three Phase Closed I-P Link Energy Meter Test Bench .
Description:
Three phase closed I-P link energy meter test bench, is designed for testing three-phase energy meters, especially for testing Closed I-P Links three-phase energy meters. It is an ideal testing eqiupint for energy meter factory or R& D institute. All the testing procedures can be automatically operated by PC or by Keyboard manually.
MAIN TECHNICAL
1. Specification of phantom load power source:
Power and consumption:
Power supply: 1P2W 220V / 240V ~10％ , 50Hz or 60Hz;
Or (3P4W 3x220V / 240V~10％ )
Max consumption: 1800VA (8 meter positions)
2. Current source:
Output current: 3x0. 001a-3x100A
Adjusting resolution: 0. 01％ (min. 0. 0001a)
Power factor: 0~3600; resolution: 0. 10
Output frequency: 45Hz~65Hz;
THD (sine wave output) : <0. 8％
Stability of current during sine wave output: 0. 05％ (180s)
Output wave: sine wave
2-21 harmonic wave, total should be less than 40％
Odd harmonic waveform
Sub harmonic waveform
Output capacity: 50VA per meter position
3. Voltage source:
Load: the Load can be resistor / inductive / capacitive (<4uF)
Adjusting resolution: 0. 01％ (min. 0. 1v)
Output frequency: 45Hz~65Hz;
THD (sine wave output) : <0. 8％
Voltage stability of power source during sine wave output: 0. 05％ (180s)
Output wave: sine wave
2-21 harmonic wave, total should be less than 40％
Output capacity: 20VA per meter position
