Video/Audio Fiber Transceiver

Product Introduction:

Video/Audio Fiber Transceiver is provided by Shenzhen Hongdy Industrial Co.,Ltd,a major Telecommunication & Postal Services supplier in Service wholesale industry in China.You can check out the specification of Video/Audio Fiber Transceiver below or get any optional result clicking into the following keywords China Video/Audio Fiber Transceiver , Video/Audio Fiber Transceiver Fiber Transceiver;Fiber Transceiver , Guangdong , Shenzhen and you can check the authentications and testimonials of Video/Audio Fiber Transceiver .

Description:
1 CHANNEL VIDEO WITH 1 CHANNEL ONE-WAY DATA FEATURE FM Video Transmission Reduces Ghosting, Jitter and Cross-Talk between Channels, Providing Superior Video Transmission NTSC, PAL, SECAM Compatible Supports RS-232, RS-422 Data Interfaces Transmitter Directly Installed in the VP and PELCO Dome No In-Field Electrical or Optical Adjustments Required Integrated WDM for Greater Product Reliability Hot-Swappable Rack Modules Automatic Resettable Fuses Distances Up to 60 km Without Repeaters SPECIFCATIONS VIDEO Input/Output +-1Vp-p(75) Bandwidth 5Hz-10MHz Differential Gain less than2％ Differential Phase less than2 Tilt less than 1％ Signal-to-Noise Ratio 60dB Wavelength 1310/1550nm, 850/1310nm Number of Fibers 1 DATA Compatibility RS232, RS422, RS485 Data Rate DC-100kbps(NRZ) ENVIRONMENTAL Operating Temp -40C ~+70C Storage Temp 40C~+85C Relative Humidity 0％~95％(Non-Condensing) POWER GF11M4R/W-PELCO/VP 12VDC@150mA GF11S5R/W-PELCO/VP 12VDC@150mA Number of Rack Slots 1 CONNECTORS Optical ST or FC Power Terminal Block with Screw Clamps Video BNC(Gold Plated Center-Pin) SIZE(mm)(LxWxH) GF11M4R/W-PELCO/VP 209X104X29mm GF11S5R/W-PELCO/VP 209X104X29mm QUALITY GUARANTEE Automatic Resettable Fuses on All Power Lines MTBF: >100, 000Hours Lifetime Warranty PLUG-AND-PLAY DESIGN Transmitter Directly Installed in the VP or PELCO Dome No In-Field Electrical or Optical Adjustments Required Rack Mount (Optional) APPLICATIONS CCTV with PTZ Camera Control Intelligent Traffic Transmission Systems Building Automation Control System DESCRIPTION The H11/W-PELCO/VP Series video and data transmitter/receiver supports the simultaneous transmission of frequency modulation video and one return data over single-mode or multimode optical fibers. The transmitter directly installed in the VP or PELCO dome. Plug-and- play design ensures ease of installation requiring no electrical or optical adjustments. The receiver is available in either stand-alone or rack mount versions.