Product Introduction:
Ceramic corrugated Tower Packing is provided by Beihai Huihuang Chemical Ceramic Co., Ltd.,a major School Furniture supplier in Furniture & Furnishing wholesale industry in China.You can check out the specification of Ceramic corrugated Tower Packing below or get any optional result clicking into the following keywords random tower packing , Ceramic corrugated Tower Packing , Description , Features , Details and you can check the authentications and testimonials of Ceramic corrugated Tower Packing .
Description:
Applications: Fining process of corrosive mixtures; Vacuum treatment;Fining and distillation of halogen organic compounds.
Ceramic corrugated Tower Packing consists of many tower packing units of similar geometric design. Corrugated sheets placed in parallel form cylindrical units called corrugated tower packing. These are a form of highly efficient packing with separating efficiency several times higher than that of loose packing. They have the quality of low-pressure drop, increased operating elasticity, minimum amplifying effect, and maximum liquid treatment compared to loose tower packing. They are called Kelapak packing overseas. In order to meet various applications and comply with instructions by the Ministry of Chemical Industry, we have realized the designation of corrugated tower packing series by undertaking development with research institutes and colleges. Data for our products follows:
X and Y stand for the corrugation dip of 30 and 45 respectively; the Arabic numerals stand for the specific area of their series.
Standard Ceramic Structure Tower Packing Series
100X
140X
250X
300X
400X
450X
500X
100Y
140Y
250Y
300Y
400Y
450Y
500Y
1.450y (SULZER BX TYPE)
This type of corrugated packing was designed by the Swiss Sulzer Company, and has design similar to Sulzer products.
Specifications
Corrugated plate thickness (mm)
Wave crest height (mm)
Wave distance (mm)
Tooth-like angle (mm)
1.4±0.2
6
11
80
Advantages:
The most economical range is F-factor1.5-2 Pressure drop of each theoretical sheet is 0.3-1mbar Minimum liquid load is 2001/m2h A distributor should be installed for every 3-4 meters inside packing towers with diameters of more than 300mm.
Applications:
Fining process of corrosive mixtures, which have strict requirements for pressure drop and number of theoretical sheets. Vacuum treatment under absolute pressure higher than1mbar. Fining and distillation of halogen organic compounds.
Data of Tower Packing Geometric Features
Corrugation dip
Specific surface area(m2/m3)
Aperture Void Ratio％
Heaping weight(kg/m3)
45
450
75
650
Product Features:
This ceramic corrugated tower packing is a new type of structured tower packing. It has many advantages, such as large throughput, little obstruction, high efficiency, high operating elasticity and undistinguished magnification. It is also resistant to corrosion and high temperatures (above 1000oc).This product is particularly suitable for the separating process of high-temperature media and corrosive media. Its operating pressure is between 0.1kpa and 500kpa, ensuring a sound effect
Applications
Rectifying organic halide.
Rectifying and absorbing some corrosive mixtures, which are definitely regulated in pressure drop and theoretic plate number.
Applied in some towers that contain a large quantity of natural media used to absorb nitric acid and concentrated sulfuric acid, as well as for purifying the air in chemical plants.
Operating in vacuum conditions at a bottom absolute pressure of 100pa.
Used in heat exchanger and demisting, or as a catalyst carrier.
Specification, Type and Feature Data
Type
Wall thickness (mm)
Specific surface area (m3/m3 )
Water power diameter (mm)
Corrugation dip
Void ％
Bulk density (Kg/m3 )
Compressive strength Mpa
Type 400
15±0.5
400
6
45
70
550-720
>2.5
Type 450
15±0.5
450
_
30
75
550-720
>2.5
Type 470
15±0.5
470
6
30
71.5
550-720
>2.5
