Product Introduction:
SCM Series S Super Thin Mill is provided by Shanghai Shibang Machinery Co., Ltd.,a major Mining Machinery supplier in Industrial Machinery wholesale industry in China.You can check out the specification of SCM Series S Super Thin Mill below or get any optional result clicking into the following keywords super thin mill , SCM Series S Super Thin Mill , SCM6015 , SCM8021 , SCM1027 , Description , Features , Details , SBM and you can check the authentications and testimonials of SCM Series S Super Thin Mill .
Description:
Super thin mill Introduction
SCM series super thin mill is on the bases of our company's production experience
for more than 15 years. We absorb advantages from the same trade abroad and athome. We review, research and try on 12 kinds of mills and horizontal hammer crushers.
And finally we developed this high-efficiency and low-cost super thin millby investigation and trial.This SCM series S super thin mill is an equipment which produces thin powder and
super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin,bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone.
Super thin mill Features and Benefits
1. High efficiency In same condition of finished particle size and power of motor, the output is 40％ higher than airflow mill and whisk mill.
2.High using rate of the quick-wear part In same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher. It can be generally one year.
3.High safety Because there are no axle tree and bolt in the grinding antrum, there will be no wearout of bearing and sealing part, also no loose of bolts.
4.Environmental protection, it will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement.
Super thin mill Structural Characteristic
The whole system of the SCM series S super thin mill consists of main unit, deceleration
machine, classifier, blower, hammer crusher, dustpan elevator, electro-magneticvibrating feeder, impulse dust cleaner, piping device, cyclone collectordevice, classifier, high-pressure motor and muffler.
Super thin mill Working principle
The main motor drives main axle and every layer rotating by reducer. Dail drives numbers of rollers rolling and rotating in the ring by pintles. Big materials are crushed into smaller particles by hammer crusher. Then they are sent to store house by elevator. The electro-magnetic vibrating feeder sends the materials evenlyto the middle of the upper dial. Under the function of the eccentricity, thematerials scatter to the side of the circle and fall into the ring to be pressed,
crushed and milled into pieces by rollers. After the first crush, materials fall into the second and the third layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be broughtinto the classifier. The rotating turbine in the collector makes the coarseparticles fall back for regrinding. The fine particles will come into the cyclone collector with the airflow and discharged by the discharging valve on the bottom of the collector. They are the final products.The airflow with little dust will be discharged through blower and muffler after being purified by the cyclone collector.
Super thin mill Technical Parameter
Model
SCM6015
SCM8021
SCM1027
Roller number
15
21
27
Diameter (mm)
Φ600
Φ800
Φ1000
Ring number
2
2
2
Main unit speed(mm)
235
235
235
Max. feeding size(mm)
10
10
10
Final size (mesh)
325-2500
325-2500
325-2500
Capacity (kg/h)
350-2500
600-4000
900-6000
Overall dimension (m)
10×2×5.5
12.4×2.5×5.8
14.5×3.8×6.3
Note: This specification is just for reference, any changes are subject to the products.
