Hammer Crusher - PC 400x300

Product Introduction:

Hammer Crusher - PC 400x300 is provided by Shanghai Shibang Machinery Co., Ltd.,a major Metallurgy Machinery supplier in Industrial Machinery wholesale industry in China.You can check out the specification of Hammer Crusher - PC 400x300 below or get any optional result clicking into the following keywords hammer crusher , Hammer Crusher , Hammer Mill , PC800x600 , PC800x1000 and you can check the authentications and testimonials of Hammer Crusher - PC 400x300 .

Description:


Hammer crusher Application:

Hammer crusher is suitable for mid-hard and light erosive materials, whose pressure
resistance strength is no more than 100Mpa and humidity lower than 15％, suchas coal, salt, chalk, gypsum, blocks, limestone, etc.









Hammer crusher Operating Principle:

The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammerto small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left tobe further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between therotors and the screening plate can also be adjusted according to different requirement.




Hammer crusher Specification



Model
Input size
(mm)

Output size
(mm)

Capacity(t/h)

Power(Kw)

Weight(t)

PC 400×300

100

15

5-10

11

0.8

PC 600×400

220

15

10-25

22

1.5

PC 800×600

350

15

20-50

55

4.7

PC 800×1000

400

15

20-75

110

7.9


Note: This specification is just for reference, any changes are subject to the products.