CPVC Cement

Product Introduction:

CPVC Cement is provided by Zhejiang Lishui Xinli Commodity Co., Ltd.,a major Antique & Reproduction Furniture supplier in Furniture & Furnishing wholesale industry in China.You can check out the specification of CPVC Cement below or get any optional result clicking into the following keywords glue , CPVC Cement , #4046-2 , Description , Features , Details , BESTWIN and you can check the authentications and testimonials of CPVC Cement .

Description:

Features:
1) Orange, heavy bodied, medium set for CPVC pipe 1/2" through 12" in all
classes and schedules. For cold, hot water (180°F) and industrial piping
systems
2) Directions: Store below 90°F (33°C).Use only on CPVC plastic. Shake
or stir before use. If jelled, replaoo. Use within 2 years of date stamped on bottom
of can
3) Cut pipe square and deburr. Clean and dry joining surfaces. Check dry fit. For
inter ference fit, pipe should push 1/4 to 3/4 way into fitting snugly
4) Use a suitable applicator at least 1/2 size of the pipe diameter; for larger sizes
use brush or roller
5) Apply weld or primer and follow directions. Apply a full, even layer of cement on
the pipe equal to the depth of socket. Coat the fitting socket with a medium
layer. Avoid excess and puddling. On bell end pipe, do not coat
beyond socket depth or allow cement to run beyond the bell. If necessary,
apply a second, full layer on pipe. Cement should fill all gaps
4) Assemble while cement is wet. If not wet, recoat parts before assembly.
Insure pipe bottoms into fitting socket. Twist 1/8 to 1/4 turn; to avoid pushout and
allow for initial set, hold for about 30 seconds. Wipe off excess
5) Allow several minutes for good handing strength. At temperatures from 60°F
(16°C) to 110°F (44°C), allow 24 hours cure for cold
water systems and 48 hours cure for hot water. Between 40°F (5°C)
and 60°F (16°C), allow 48 hours for cold water and 96 hours
for hot water systems. Longer cure periods are necessary when system is used
for chemicals. Cure time is affected by pipe diameter, pressure and temperature.
Read IPS Set & Cure Time Schedule, Product Bulletin and MSDS.
6) Caution: Keep out of reach of children. Do not take internally. Keep away from
heat, spark, open flame, other sources of ignition. Vapors may ignite explosively.
Use only in well ventilated area; if not well ventilated, use forced ventilation or
NIOSH approved respirator. Avoid breathing vapors. Avoid contact with skin and
eyes. Use skin and eye protection. Eye contact may cause injury. Keep container
closed. If inhaled, move into fresh air. If not breathing give artificial respiration.
If breathing is difficult, give oxygen and call physician. In case of eye or skin
contact, flush with water for 15mins. If irritation persists, get medical attention.
If swallowed, give 2 glasses of water. Do not induce vomiting. Contact physician
immediately. Contains tetrahydrofuran (109-99-9); methyl ethyl ketone
(78-93-3); cyclohexanone (108-94-1) and CPVC resin (68648-82-8)

Size: 236ml/tin (clear)

Packing:
24 tins/ctn
Carton dimensions: 41.5 x 28 x 11.2cm
Volume: 0.013cbm
N.W.: 6.5kg
G.W.: 7kg