Mechanical Wrapping Machine for Pipeline Fitting

Product Introduction:

Mechanical Wrapping Machine for Pipeline Fitting is provided by NingBo Ideal Anticorrosion Material Co., Ltd.,a major Construction & Real Estate supplier in Construction & Real Estate wholesale industry in China.You can check out the specification of Mechanical Wrapping Machine for Pipeline Fitting below or get any optional result clicking into the following keywords and you can check the authentications and testimonials of Mechanical Wrapping Machine for Pipeline Fitting .

Description:
The wrapping machine is mainly consists of rolling frame, pulling machine,
odd-track machine etc. Since the steel pipe put on the four wheels, the
adjustable speed electromotor drive the wheel enable the pipe rolling, using
by the tensile force which is occurred since the tape is pulling, enable the
steel pipe fit to the wheel on the pulling machine. Rely on the angle between
wheel and steel pipes, enable the pulling frame go forward smoothly on the
odd-track meanwhile enable the tape wrapping spirally on the steel pipe.

User guide
After Surface clearing for the steel pipe, and put the pipe on the four wheels,
then adjust the angle and length of the wheel on the pulling frame. rolling
the steel pipe in order that the pipe fit to the wheel on the pulling machine,
after that the pulling frame will go forward smoothly on the odd-track.
Observation on the track where the wheel go through, and look at the
distance of spiral trace which conforms to percentage of the overlap for the
tape. If there is a big difference, you need to adjust the angle of the two
wheels in the same direction.

During the rolling of the steel pipe, you have to apply the primer, put the inner
tape and outer tape on the wrapping axis and then adjust nut fit to the tensile
force.

After you brush the primer on the steel pipe about 5 minutes, the primer will dry.
Then, firstly pulling the inner tape and stick on the pipe and open the rolling
frame, until the outer tape can lap inner tape over, and then pulling the outer
tape out cover the inner tape on the steel pipe.

During the process of the wrapping, you must pay attention on overlap and
the tensile force of the tape consistently.