Chemical Anchor

Product Introduction:

Chemical Anchor is provided by Hangzhou Yuanda Adhesive Material Co., Ltd.,a major Organic Chemical Materials supplier in Chemicals Material wholesale industry in China.You can check out the specification of Chemical Anchor below or get any optional result clicking into the following keywords chemical anchor , Chemical Anchor , M10 , M12 , M16 , M20 , M24 , Description , Features , Details , JG and you can check the authentications and testimonials of Chemical Anchor .

Description:

They are non-expansive, stress-free anchors, and can be installed at closer center and edge spacing without reducing concrete load bearing capacity.

1. Prefix drill hole using drill, maintaining the specified drill hole depth and drill hole diameter
2. Remove drill dust completely
3. Insert the right glass resin capsule
4. Turn stud into drill hole using drill attachment. Stop when the setting depth specified reaches the surface
5. The anchor is correctly fixed when the setting depth specified flushes with the drill hole surface and excess mortar is discharged from the hole. If excess mortar fails to come out of the drill hole, the anchor stud must be removed immediately
6. An additional capsule must be inserted along side to the previous capsule and the same procedure repeated to fix the anchor however at all times. Excess mortar shall be discharged from the hole to indicate proper fixing
7. Connect fixture at the end of the curing and tighten with nut the washer. After the appropriate setting time tighten the fixing and apply the work load